Bad Axe Particulate Conqueror is designed to control dust and mold in remediation, demo, water/fire-restoration cleanup and construction projects.
It is a water-soluble resin that can be fogged in the air or applied directly to surfaces. Bad Axe Particulate Conqueror coalesces airborne and surface-borne particulate debris, immobilizing them, and increasing their mass. Its knockdown effect increases the HEPA capture efficiency of air scrubbers and HEPA vacuums. Used before, during and after your project, Bad Axe Particulate Conqueror is an inexpensive way to reduce potential cross-contamination, enhance source removal efforts and improve air- and surface-sampling results.
What is Bad Axe Particulate Conqueror? Bad Axe Particulate Conqueror is a mild blend of uniquely charged surfactants used as a cleaning aid. It is designed for use in remediation, demolition, and water- and fire-restoration cleanup of residential and commercial properties.
How it works: Bad Axe Particulate Conqueror surrounds airborne and surface-borne particulate debris, immobilizing them on surfaces to be cleaned before, during and/or after a remedial procedure. This results in contamination control of the work place and adjoining spaces. Use Bad Axe Particulate Conqueror to enhance your remedial process and improve air sampling and lift test results.
Usage instructions: Dilute Bad Axe Particulate Conqueror 16 ounces per gallon of water. That can also be calculated as 1 part Bad Axe Particulate Conqueror to 8 parts water. Fog or mist into air and, on surfaces, following the establishment of containment and after appropriate engineering measures are in place. Allow to dry. For optimal results, then vacuum surfaces with a HEPA-filtered vacuum. Run HEPA-filtered air scrubbers for a period consistent with industry standards.
Additional Information: Particulate Conqueror is a concentrate product. When fogged, Particulate Conqueror covers approximately 3,000 square feet per mixed (RTU) gallon. pH: 6.0. Always use proper PPE and approved respiratory protection during any project. Allow product to tack before demo, source removal or testing. Re-apply as often as needed to control airborne particulate. Clean fogging or misting equipment with warm water. Bad Axe Particulate Conqueror contains no heavy metals, no fragrances, is non-reactive, VOC compliant, and corrosion- and abrasion-resistant.
